Your Local, Certified & Insured Tree Experts
At JMS Tree Service, we’re proud to serve Asheville and nearby neighborhoods with responsive service, expert advice, and transparent quotes. Whether it’s a hazardous removal near Biltmore Park or structural pruning in West Asheville, our local team is ready when you are. We handle emergency tree service Asheville calls day and night, and our certified pros advise on the safest, most cost-effective approach for your property. Ask us how much does tree removal cost in Asheville—we’ll assess on-site and provide a written estimate.
Asheville’s Trusted Tree Care Team
At JMS Tree Service, we’re proud to serve Asheville and surrounding communites with responsive service, expert advice, and transparent quotes. Whether it’s a hazardous removal near Biltmore Park or structural pruning in West Asheville, our local team is ready when you are. We handle emergency tree service Asheville calls quickly and advise on the safest, most cost-effective approach for your property. If you’re wondering how much does tree removal cost in Asheville, we’ll assess on-site and provide a written estimate before any work begins.
Beyond the cut, we care for the long-term health and appearance of your landscape. Our recommendations consider species, season, structure, and clearance requirements around roofs, driveways, and utilities. You’ll get practical guidance from an experienced crew—with certified arborist Asheville input available—so you can decide with confidence and budget clarity.
Our Tree Care Services
When a tree is dead, unsafe, storm-damaged, or too close to structures, we remove it safely and efficiently—protecting turf, hardscapes, and utilities. Expect careful rigging, controlled lowering, and thorough debris cleanup.
Selective, structural cuts reduce risk and protect roofs, gutters, and siding. Crown reduction is a safer alternative to topping—targeting end-weight to lower failure risk while preserving form and health.
Need rapid height reduction or view clearing? We’ll evaluate goals and present the best path—often crown reduction or selective thinning for better long-term results than topping.
From overgrown lots to new build sites, we clear brush, small trees, and unwanted vegetation, with hauling and rough grading available.
Why Asheville Locals Choose Us
-
Certified guidance: Work with experienced crews and get certified arborist Asheville recommendations when needed.
-
Reliable scheduling: Prompt estimates and on-time crews—no runaround or surprise add-ons.
-
Clean finishes: Rigging, mats, and debris control to protect lawns and hardscapes, followed by full cleanup and hauling.
-
Local reputation: Trusted across North, West, and South Asheville, including Biltmore Park, Kenilworth, and Montford.
Choosing a local company matters in the mountains. We understand Asheville’s terrain, tree species, and seasonal weather patterns—so our advice is tailored, not generic. From risk assessment to final rake-out, you’ll get professional communication, respectful crews, and results that look great long after we leave.
Our Tree Care Process
From Assessment to Immaculate Cleanup
Every project starts with a clear plan so you get predictable results and a spotless property. When you contact JMS Tree Service for tree service Asheville NC, we schedule a site visit to understand your goals, evaluate species and structure, and identify hazards (power lines, slope, tight access). You’ll receive a written estimate with options—often including safer alternatives like crown reduction instead of topping—so you can choose the approach that best fits your budget and timeline.
Step 1 — Assessment & Recommendations
A lead tech (with access to certified arborist Asheville guidance) inspects tree health, structure, lean, load paths, and targets below. We discuss aesthetics, clearance needs, and future growth, then recommend removal, trimming, or pruning with the right timing for the species.
Step 2 — Planning & Protection
Before work, we design a rigging and access plan, set drop zones, and stage ground protection mats to shield turf and hardscapes. We also coordinate parking/traffic if needed and review the plan with you so expectations are clear.
Step 3 — Controlled Execution
Using proper rigging and, when appropriate, an aerial lift or climbing system, we make controlled cuts to protect structures and landscaping. Trimming and pruning focus on airflow, light, and structure—never over-cutting—while removals use sectioning and controlled lowers to minimize impact.
Step 4 — Cleanup & Hauling
We chip limbs, cut logs to spec (or haul them), blow off hardscapes, and rake out work areas. The goal is a clean, finished look that raises curb appeal the same day. If you were researching how much does tree removal cost in Asheville, your final invoice will match the written scope—no surprises.
Safety Procedures
ANSI, OSHA & Asheville-Specific Best Practices
Safety isn’t an add-on—it’s built into every decision we make on your property. Our crews follow ANSI Z133 and OSHA best practices, starting each shift with a tailboard safety meeting and a job hazard analysis (JHA) that covers weather, terrain, utilities, and site access. We establish clear communication (hand signals/radios), assign roles, and set exclusion zones so only authorized team members enter the drop area.
PPE & Gear Readiness
Crews wear chainsaw-rated pants/chaps, helmets with face/ear protection, gloves, and appropriate footwear. Climbing gear, ropes, carabiners, and rigging hardware are inspected and logged; aerial lifts receive pre-use checks.
Why it matters: Proper PPE and equipment inspections reduce incident risk and keep projects on schedule.
Utilities, Traffic & Public Safety
We observe minimum approach distances to energized lines, coordinate with the utility when necessary, and deploy cones/signage if the work impacts sidewalks or streets.
Why it matters: Asheville’s narrow roads and steep drives require proactive traffic and pedestrian control.
Rigging, Cuts & Exclusion Zones
We size ropes/devices to the expected load, verify anchor health, and use controlled lowering to protect structures. Ground crews maintain exclusion zones and use spotters during lowers and fells.
Why it matters: Controlled mass and clear zones prevent property damage and injuries.
Weather, Terrain & Emergency Readiness
If wind, lightning, or icy conditions push risk beyond our threshold, we pause. Aerial rescue plans are reviewed before climbing, and first-aid kits/fire extinguishers are staged and accessible.
Why it matters: Mountain weather changes fast; pausing is safer (and cheaper) than pushing through unsafe conditions.
Safety is also about respect for your property: ground protection mats, careful equipment staging, and meticulous cleanup ensure your lawn, beds, and hardscapes look great when we’re done. This safety-first approach is the backbone of our reputation for responsive, reliable emergency tree service Asheville can count on.
Areas We Serve In Western North Carolina
In addition to serving clients in Asheville, we proudly work with residents from surrounding cities and counties including:
-
Arden
-
Biltmore Forest
-
Fletcher
-
Weaverville
-
Candler
-
Fairview
-
Swannanoa
-
Woodfin
-
Hendersonville
-
Canton
-
Burnsville
-
Black Mountain
-
Weaverville
Whether you’re near Biltmore Park Town Square or up in North Asheville’s hills, our crews plan routes and equipment access in advance to keep your project smooth and on schedule.